Your browser version is too low, it may lead to sites not normally access!
You can use the site to function properly, use these browsers.
Your browser version is too low, it may lead to sites not normally access!
You can use the site to function properly, use these browsers.
The automatic floor scrubber is a cleaning machine that cleans the floor while absorbing the sewage and takes the sewage away from the site. It has been widely used in various fields in developed countries. The cleaning concept of replacing manpower with machinery has been deeply rooted in the hearts of the people.
1. Add water to open the water tank cover, add clean water to the clean water tank, add an appropriate amount of detergent, the addition ratio can be determined according to the degree of pollution in the clean environment, and the water tank cover needs to be tightly closed.
Note: It is strictly forbidden to pour washing powder, high-foaming detergent, and detergent into the water tank. The generated foam will damage or burn the machine!
Device operation: Turn on the key switch, lightly step on the brush plate pedal, lower the brush plate, lower the squeegee, press the brush plate and suction switch, adjust the water supply according to the degree of oil pollution on the ground, press the handle control ring to adjust the speed of the scrubber, and wash The floor machine can start scrubbing work; after the work is completed, first turn off the brush plate button, step on the brush plate pedal, lift the brush plate, and the machine continues to move forward. When the squeegee absorbs all the water on the ground, pick it up Lift the pickpocket handle, and then turn off the suction motor button, after the machine functions are all stopped, turn off the key switch.
Note: It is strictly forbidden to keep the machine on the spot for a long time when brushing, which will cause damage to the ground!
2. Clean sewage treatment of the water tank: push the machine to the sewer outlet and unscrew the sewage pipe cover; water tank cleaning: open the water tank cover, and block the air inlet of the fan with a rag to prevent water from entering the fan and causing damage to the fan , And then rinse the inside of the water tank and the filter with clean water. Cleaning the surface of the machine: wipe it with a clean cloth.
Note: It is strictly forbidden to flush the air inlet of the scrubber with water! It is strictly forbidden to clean the surface and inside of the machine with corrosive cleaning fluid!
3. To charge, first unplug the power supply plug of the scrubber, insert the charger plug, and then insert the charger plug into the power socket. The charging time is generally 6 hours. Back brush, brush up. First lift the brush tray, turn on the key switch, and press the brush back button.
Note: It is strictly forbidden to use the automatic brush back function when the machine head is not raised, so as to avoid damage to the brush and buckle of the machine! Place the scrubbing brush or needle holder in front of the machine, raise the scrubber brush, push it to the top of the scrubber or needle holder, and put it down, turn on the key switch, press the scrubbing button, and hear a clear rubbing sound When, turn off the brush plate button, step on the brush plate pedal, and lift the brush plate.
中文版